ASQ RRD Webinar: Case Study – Pellet Conveyor Failure

Share This Post

On Thursday, Jan 12 2023, Kaushal Kumar Singh 

Presented ASQ RRD Webinar: Case Study – Pellet Conveyor Failure

Case Study of Pellet Pipe Conveyor Belt (ST1800) Frequent Failure Kaushal Kumar Singh1 OSSTG, Tata Steel Limited, Jamshedpur, India1

Abstract: This case study on a pipe conveyor steel cord belt. Pipe conveyor receives pellet directly from pellet plant or from reclaim circuit from storage yard and feeds it to intermediate storage bin (ISB) through a set of conveyors.

From ISB, pellets are transported to different blast furnaces according to the requirement.

The complete conveyor circuit is designed to feed pellet at 1650 TPH to ISB. Conveyor was installed and commissioned in year 2012.

The belt speed is 2.2 m/s and nominal pipe diameter is 450 mm (Return and carrying side).

Belt is driven by 600 kW, 1490 rpm AC Motor with VVVF drive

Slides

More To Explore
Recorded Webinars

AIAG VDA Failure Mode & Effects Analysis (FMEA) Handbook – Is It Now the Standard?

On Thursday, November 9, Rich Harpster presented: AIAG VDA Failure Mode & Effects Analysis (FMEA) Handbook – Is It Now the Standard? In June of 2019, the AIAG VDA FMEA Handbook (“Handbook”) was published. Created by the Automotive Industry Action Group (AIAG) and the German Association of the Automotive Industry (VDA), the Handbook was supposed to
Recorded Webinars

ASQ RRD Webinar: Kick-off Your Reliability Program with a Requirements Failure Modes and Effects Analysis

On Thursday, October 12, Jaime Franqui and Shawn Newell presented:  ASQ RRD Webinar: Kick-off Your Reliability Program with a Requirements Failure Modes and Effects Analysis Thoroughly checking requirements in the very early stages of development is extremely important to reducing the risk of out-of-phase rework later in the program’s lifecycle. Therefore, one of a development

Scroll to Top
small_c_popup-1-1-1-1.png

Thanks for following this webinar!

Enter the form to get the RU's you earned