ASQ RRD series webinar: Geometric Dimensioning and Tolerancing (GD&T)

Share This Post

On Tuesday, July 11, 2023, TecEase presented:

ASQ RRD series webinar: Geometric Dimensioning and Tolerancing (GD&T)

 

GD&T is the solution to the seemingly endless argument about who made the mistake in manufacturing a part. Drawings that are not GD&T structured are open to interpretation. The designer sends the part back to the manufacturer indicating that it is not to print. The supplier responds that the print was followed. The isssue is how the drawing was interpreted. A drawing laid out from left to right, but where the manufacturer produced it reading it from right to left can result in numerous errors. This simple error in a complex drawing can result in position and tolerancing to be off, and not represent the intent of the designer. GD&T takes the interpretation out of the reading as all measures are taken from what are called datums. in this manner, both designer and manufacturer are reading it the same way.

More To Explore

Recorded Webinars

AIAG VDA Failure Mode & Effects Analysis (FMEA) Handbook – Is It Now the Standard?

On Thursday, November 9, Rich Harpster presented: AIAG VDA Failure Mode & Effects Analysis (FMEA) Handbook – Is It Now the Standard? In June of 2019, the AIAG VDA FMEA Handbook (“Handbook”) was published. Created by the Automotive Industry Action Group (AIAG) and the German Association of the Automotive Industry (VDA), the Handbook was supposed to

Recorded Webinars

ASQ RRD Webinar: Kick-off Your Reliability Program with a Requirements Failure Modes and Effects Analysis

On Thursday, October 12, Jaime Franqui and Shawn Newell presented:  ASQ RRD Webinar: Kick-off Your Reliability Program with a Requirements Failure Modes and Effects Analysis Thoroughly checking requirements in the very early stages of development is extremely important to reducing the risk of out-of-phase rework later in the program’s lifecycle. Therefore, one of a development

Scroll to Top
small_c_popup-1-1-1-1-1.png

Thanks for following this webinar!

Enter the form to get the RU's you earned